INSTRUCTIONS FOR CABLE ASSEMBLY – TWIST ON 

STEP 1. Shown are different parts of the connector.

STEP 2. First thing to do is to strip the inner conductor, dielectric, and jacket. Be Sure to remove all

             Burrs and break sharp edges in stripping the Cable Dims.

STEP 3. Twist braid in a clockwise direction so that at least 0.8mm of Dielectric is bared,

              and braid is left flat.

STEP 4. Insert inner conductor into the back end of the connector gently, and feed it

             into the guide hole.

STEP 5. Push and screw the connector onto the cable in a clockwise direction until it stops.